top of page
QUICK SETUP GUIDE
Online Setup Videos
QuickStart - Back Office
QuickStart - BirdDog Camera
QuickStart - Router
QuickStart - Sony A6000
QuickStart - Wireless Radios
Streaming only Setup
On arrival check to see that you have power, and placement for the camera.
Open the case and connect the laptop to the internet using the modem video below for reference.
Mobile Router
Then connect the camera to the POE switch.
Next connect the audio to the mixer and pace the floor mic in position.
Camera
Audio
Finally call tech support for us to dial in camera settings, audio settings and start the stream.
At this point the job requires you to hit start and stop on the recorder, it will automatically forward to the next team. If they go out of order, use the up/down arrows to select the right team.
Online Learning If you get warning, click ok
Online Learning capture
Text or Call Tech @ 209.227.1819
Legacy Blackmagic Setup
1. Turn on Cellular Data Device
2. Connect Wifi Router - Power and Cellular Data
3. Place Server in position and power plugged in
4. Use the correct ports for the computer and internet
5. Connect the USB Dongle to Server
6. Connect the Startech to the Server USB C port
7. Connect the Thunderbolt Cable to the Startech
Be sure to look for the correct orientation - they only plug in one way
8. Connect the Thunderbolt Cable to the Blackmagic Box
Be sure to look for the correct orientation - they only plug in one way
9. Connect the Large side of the HDMI Cable to the Blackmagic Box
Be sure to look for the correct orientation - they only plug in one way
10. Connect the Dummy Battery to the Charger and the Micro HDMI to the Camera
Be sure to look for the correct orientation - they only plug in one way
11. Tape down the Video Capture gear using Gaff Tape
12. Call Tech Support Now - 209.227.1819
bottom of page